Pepperl+FuchsProximity SensorsInductive Sensors
Inductive sensor NBN10-F10-E0

Part number: NBN10-F10-E0

  • 10 mm non-flush
  • 3-wire DC
    • Datasheet NBN10-F10-E0

    Specification

    General specifications
    Switching functionNormally open (NO)
    Output typeNPN
    Rated operating distance10 mm
    Installationnon-flush
    Output polarityDC
    Assured operating distance0 ... 8.1 mm
    Reduction factor rAl 0.3
    Reduction factor rCu 0.2
    Reduction factor r304 0.6
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V DC
    Switching frequency0 ... 500 Hz
    Hysteresistyp. 5%
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 3 V
    Operating current0 ... 100 mA
    Off-state current0 ... 0.5 mA typ. 0.1 µA at 25 °C
    No-load supply current≤ 15 mA
    Switching state indicatorLED, yellow
    Functional safety related parameters
    MTTFd3178 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typecable PVC , 2 m
    Core cross section0.34 mm2
    Housing materialPBT
    Sensing facePBT
    Degree of protectionIP67
    Cable
    Cable diameter4.6 mm ± 0.2 mm
    Bending radius> 10 x cable diameter
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550