Pepperl+FuchsProximity SensorsInductive Sensors
Inductive sensor NBB15-F148P10-ARO
Inductive sensor with relay contact output

Part number: NBB15-F148P10-ARO

  • 15 mm flush
  • Relay contact output
  • Extended temperature range
  • Highly shock and vibration resistant
    • Datasheet NBB15-F148P10-ARO

    Specification

    General specifications
    Switching functionNormally closed (NC)
    Output typerelay
    Rated operating distance15 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 12.15 mm
    Reduction factor rAl 0.45
    Reduction factor rCu 0.35
    Reduction factor r304 0.8
    Reduction factor rBrass 0.5
    Output typerelay
    Nominal ratings
    Operating voltage10 ... 30 V DC
    Switching frequency0 ... 600 Hz
    Hysteresis2 ... 20 % ( typ. 3 % )
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionno
    Voltage drop≤ 0.5 V (≤ 0.275 V at ≤ 100 mA operating current)
    Operating current0 ... 200 mA
    Off-state current≤ 10 µA
    No-load supply current≤ 10 mA
    Time delay before availability≤ 300 ms
    Switching state indicatorLED, yellow
    Functional safety related parameters
    MTTFd1004 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Ambient conditions
    Ambient temperature-40 ... 85 °C (-40 ... 185 °F)
    Storage temperature-40 ... 85 °C (-40 ... 185 °F)
    Mechanical specifications
    Connection typecable PUR , 2 m
    Core cross section0.5 mm2
    Housing materialanodized aluminum
    Sensing facePBT
    Degree of protectionIP67 / IP69K
    Tightening torque, housing screws≤ 1.8 Nm