Pepperl+FuchsProximity SensorsInductive Sensors
Inductive sensor NCB1,5-18GM60-E3-D-V1
Inductive sensor

Part number: NCB1,5-18GM60-E3-D-V1

  • 1.5 mm flush
  • Compression proof up to 350 bar, dynamic on active surface
  • For applications in hydraulic cylinder
    • Datasheet NCB1,5-18GM60-E3-D-V1

    Specification

    General specifications
    Switching functionNormally closed (NC)
    Output typePNP
    Rated operating distance1.5 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 1.22 mm
    Reduction factor r304 0.5
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 60 V DC
    Switching frequency0 ... 1500 Hz
    Hysteresistyp. 5 %
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 2.5 V
    Operating current0 ... 200 mA
    No-load supply current≤ 10 mA
    Limit data
    Operating pressure350 bar (5076.4 psi)
    Functional safety related parameters
    MTTFd1240 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CCC approvalCertified by China Compulsory Certification (CCC)
    Ambient conditions
    Ambient temperature-35 ... 80 °C (-31 ... 176 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Housing materialStainless steel 1.4305 / AISI 303
    Sensing faceEpoxy (black)
    Degree of protectionIP67