Inductive sensor NCN3-F31K2-N5-B13-S
Part number: NCN3-F31K2-N5-B13-S
-40 ... 100 °C (-40 ... 212 °F)
Specification
General specifications | ||
---|---|---|
Switching function | 2 x normally closed (NC) | |
Output type | NAMUR | |
Rated operating distance | 3 mm | |
Installation | flush mountable | |
Assured operating distance | 0 ... 2.4 mm For assured operating distance sar see Manual Functional Safety. | |
Actual operating distance | 2.7 ... 3.3 mm typ. | |
Actuating element | Stainless steel 1.4305 / AISI 303 8.5 mm x 8.5 mm x 0.5 mm | |
Reduction factor rAl | 0.4 | |
Reduction factor rCu | 0.4 | |
Reduction factor r304 | 0.7 | |
Reduction factor rSt37 | 1 | |
Reduction factor rBrass | 0.5 | |
Output type | 2-wire | |
Nominal ratings | ||
Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
Switching frequency | 0 ... 3 kHz | |
Hysteresis | typ. 5 % | |
Short-circuit protection | yes | |
Suitable for 2:1 technology | yes , Reverse polarity protection diode not required | |
Current consumption | ||
Measuring plate not detected | ≥ 3 mA | |
Measuring plate detected | ≤ 1 mA | |
Time delay before availability | ≤ 1.1 ms | |
Switching state indicator | LED, yellow | |
Valve status indicator | LED, yellow | |
Functional safety related parameters | ||
Safety Integrity Level (SIL) | SIL 2 | |
MTTFd | 1730 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Valve circuit | ||
Voltage | max. 32 V DC | |
Current | max. 240 mA | |
Short-circuit protection | no | |
Reverse polarity protection | yes, with reversed output LED is out of function, therfore more power for solenoid valve | |
Compliance with standards and directives | ||
Standard conformity | ||
NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 | |
Electromagnetic compatibility | NE 21:2007 | |
Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
Approvals and certificates | ||
IECEx approval | ||
Equipment protection level Ga | IECEx TUR 17.0055X | |
Equipment protection level Gb | IECEx TUR 17.0055X | |
Equipment protection level Mb | IECEx TUR 17.0055X | |
ATEX approval | ||
Equipment protection level Ga | TÜV 17 ATEX 8125 X | |
Equipment protection level Gb | TÜV 17 ATEX 8125 X | |
Equipment protection level Gc (ic) | PF13CERT2895 X | |
UL approval | cULus Listed, General Purpose, Class 2 Power Source | |
Ordinary Location | E87056 | |
Hazardous Location | E501628 | |
Control drawing | 116-0455 | |
CCC approval | ||
Hazardous Location | 2020322315002305 | |
NEPSI approval | ||
NEPSI certificate | GYJ18.1172X | |
Ambient conditions | ||
Ambient temperature | -40 ... 100 °C (-40 ... 212 °F) | |
Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
Mechanical specifications | ||
Connection type | screw terminals | |
Connection (system side) | Screw terminals, tightening torque min. 0.5 Nm Stripped length 7 mm , M20 x 1.5 cable gland , usable thread length 13.5 mm , screw-in depth max. 13.5 mm | |
Core cross section (system side) | rigid: 0.14 ... 2.5 mm2 flexible: 0.14 ... 1.5 mm2 flexible with core-end sleeve: 0.25 ... 1.5 mm2 | |
Connection (valve side) | like connection (system side) | |
Core cross section (valve side) | like core cross section (system side) | |
Housing material | rugged, translucent polycarbonate (PC) optimised for outdoor use | |
Housing base | PC | |
Degree of protection | IP66 / IP68 / IP69 | |
Tightening torque, fastening screws | 4 Nm ... 5 Nm | |
Tightening torque, housing screws | ≤ 2 Nm | |
Tightening torque of cover srews | 1.5 Nm | |
Tightening torque, cable gland | M20 x 1.5 ; max. 4 Nm | |
Tightening torque, stopping plug | 1 Nm | |
Note | LED switch-off | |
General information | ||
Use in the hazardous area | see instruction manuals | |
ECLASS 13.0 | 27220501 | |
ECLASS 12.0 | 27220501 | |
ECLASS 11.0 | 27220501 | |
ECLASS 10.0.1 | 27220501 | |
ECLASS 9.0 | 27220501 | |
ECLASS 8.0 | 27220501 | |
ECLASS 5.1 | 27220501 | |
ETIM 9.0 | EC002714 | |
ETIM 8.0 | EC002714 | |
ETIM 7.0 | EC002714 | |
ETIM 6.0 | EC002714 | |
ETIM 5.0 | EC002714 | |
UNSPSC 12.1 | 39121550 |