Pepperl+FuchsProximity SensorsInductive Sensors
Inductive power clamp sensor NBxx-F58D3x3-E8-V1
Amplifier unit

Part number: NBxx-F58D3x3-E8-V1

  • Technical data are only valid if satellite unit is connected
  • Completely halogen and silicon free
  • Extremely bright triple luminous band indication
  • Orientation of the coding of the connector plug to position 3
    • Datasheet NBxx-F58D3x3-E8-V1

    Specification

    General specifications
    Switching function2 x normally open (NO)
    Output typePNP
    Output polarityDC
    Output type4-wire
    Nominal ratings
    Operating voltage10 ... 30 V
    Switching frequency0 ... 100 Hz
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 3 V
    Rated insulation voltage60 V
    Operating current0 ... 100 mA
    Off-state current0 ... 0.5 mA typ. 0.1 µA at 25 °C
    No-load supply current≤ 15 mA
    Constant magnetic field100 mT
    Alternating magnetic field100 mT
    Tuning-outtypically 1 s
    Operating voltage indicatorLED green
    Switching state indicatorSwitching state "closed" = LED red (S2)
    switching state "open" = LED yellow (S1)
    Functional safety related parameters
    MTTFd1000 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 50 °C (-13 ... 122 °F)
    Storage temperature-40 ... 85 °C (-40 ... 185 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Housing materialPA66
    Degree of protectionIP65
    Protection classII
    Noteonly for use with satellite unit NBN2-F58xx... family