Pepperl+FuchsProximity SensorsInductive Sensors
Inductive sensor NXN3-8GM25-E2-V3

Part number: NXN3-8GM25-E2-V3

  • 3 mm non-flush
    • Datasheet NXN3-8GM25-E2-V3

    Specification

    General specifications
    Switching functionNormally open (NO)
    Output typePNP
    Rated operating distance3 mm
    Installationnon-flush
    Output polarityDC
    Assured operating distance0 ... 2.43 mm
    Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
    9 mm x 9 mm x 1 mm
    Reduction factor rAl 0.5
    Reduction factor rCu 0.45
    Reduction factor r304 0.75
    Reduction factor rBrass 0.5
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V
    Switching frequency0 ... 1000 Hz
    Hysteresistyp. 5%
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 1.5 V
    Operating current0 ... 100 mA
    Off-state current0 ... 0.2 mA
    No-load supply current≤ 10 mA
    Time delay before availability≤ 100 ms
    Switching state indicatorMultihole-LED, yellow
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Storage temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typeConnector plug M8 x 1 , 3-pin
    Housing materialbrass, nickel-plated
    Sensing faceLCP
    Degree of protectionIP67
    General information
    Scope of delivery2 hex nuts included
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550