Inductive analog sensor NBB5-18GM60-I-V1
Part number: NBB5-18GM60-I-V1
Specification
| General specifications | ||
|---|---|---|
| Output type | Analog current output | |
| Installation | flush | |
| Output polarity | DC | |
| Measurement range | 1 ... 5 mm | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V DC typ. 20 V DC | |
| Reverse polarity protection | yes | |
| Repeat accuracy | 0 ... 80 µm | |
| No-load supply current | ≤ 12 mA | |
| Analog output | ||
| Output type | 4 ... 20 mA | |
| Slope of output characteristic | 4 mA / mm | |
| Linearity error | ≤ ± 5 % of full-scale value | |
| Load resistor | ≤ 1000 Ω typ. 500 Ω | |
| Rate of current rise | ||
| 4 ... 20 mA | max. 30.9 A/s | |
| 20 ... 4 mA | max. 11.1 A/s | |
| Recovery time | 1 ... 10 ms , typ. 5 ms | |
| Adjustment tolerance zero point | ≤ ± 5 % of full-scale value | |
| Temperature drift | ≤ ± 0.15 %/K of full-scale value | |
| Residual ripple | ± 125 µA | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 EN 60947-5-7:2003 IEC 60947-5-7:2003 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 4-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP67 | |
| ECLASS 13.0 | 27274001 | |
| ECLASS 12.0 | 27274001 | |
| ECLASS 11.0 | 27270101 | |
| ECLASS 10.0.1 | 27270101 | |
| ECLASS 9.0 | 27270101 | |
| ECLASS 8.0 | 27270101 | |
| ECLASS 5.1 | 27270101 | |
| ETIM 9.0 | EC002714 | |
| ETIM 8.0 | EC002714 | |
| ETIM 7.0 | EC002714 | |
| ETIM 6.0 | EC002714 | |
| ETIM 5.0 | EC002714 | |
| UNSPSC 12.1 | 39121550 | |