Inductive analog sensor NBB5-18GM60-I3

Part number: NBB5-18GM60-I3

  • Inductive analog
  • Output 0 mA ... 20 mA
  • Flush mounting
  • Specification

    General specifications
    Output typeAnalog current output
    Installationflush
    Output polarityDC
    Measurement range1 ... 5 mm
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V DC typ. 20 V DC
    Reverse polarity protectionyes
    Repeat accuracy0 ... 80 µm
    No-load supply current≤ 12 mA
    Analog output
    Output type0 ... 20 mA
    Slope of output characteristic5 mA / mm
    Linearity error≤ ± 5 % of full-scale value
    Load resistor≤ 1000 Ω typ. 500 Ω
    Rate of current rise
    0 ... 20 mAmax. 38.9 A/s
    20 ... 0 mAmax. 13.9 A/s
    Recovery time1 ... 10 ms , typ. 5 ms
    Adjustment tolerance zero point≤ ± 5 % of full-scale value
    Temperature drift≤ ± 0.15 %/K of full-scale value
    Residual ripple± 125 µA
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    EN 60947-5-7:2003
    IEC 60947-5-7:2003
    Approvals and certificates
    UL approvalcULus Listed, Class 2 Power Source
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typecable PVC , 2 m
    Core cross section0.5 mm2
    Housing materialbrass, nickel-plated
    Sensing facePBT
    Degree of protectionIP67
    Cable
    Cable diameter4.6 mm ± 0.2 mm
    Bending radius> 10 x cable diameter
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550