Inductive sensor NMB1,5-8GM35-E2-FE-1M-V1

Part number: NMB1,5-8GM35-E2-FE-1M-V1

  • Stainless steel sensing face
  • Sensing range 1.5 mm
  • Ferrous targets
  • 3-wire DC
  • Pigtail quick disconnect
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typePNP
    Rated operating distance1.5 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 1.215 mm
    Actuating elementFerrous targets
    Reduction factor rAl 0
    Reduction factor rCu 0
    Reduction factor r304 0.4 - 0.7
    Reduction factor rSt37 1
    Reduction factor rBrass 0
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V DC
    Switching frequency80 Hz
    Hysteresis5 ... 15 typ. 10 %
    Reverse polarity protectionyes
    Short-circuit protectionyes
    Voltage drop≤ 2 V
    Operating current≤ 100 mA
    Current consumption≤ 10 mA
    Off-state current≤ 10 µA
    Indicators/operating means
    Operation indicatorLED red: Output
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 75 °C (-13 ... 167 °F)
    Mechanical specifications
    Connection typeCable connector M12 x 1 , 3-pin with PUR cable 1 m
    Core cross section0.14 mm2
    Housing materialStainless steel 1.4305 / AISI 303
    Sensing faceStainless steel 1.4305 / AISI 303
    Degree of protectionIP67
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550