Inductive sensor NMB3-8GM23-Z4-C-850MM-V1

Part number: NMB3-8GM23-Z4-C-850MM-V1

  • 3 mm flush
  • Stainless steel sensing face
  • Increased operating distance
  • Weld Immune
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typeTwo-wire
    Rated operating distance3 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 2.43 mm
    Actuating elementFerrous targets
    Reduction factor rAl 0.3
    Reduction factor r304 0.8
    Output type2-wire
    Nominal ratings
    Operating voltage6 ... 30 V DC
    Switching frequency5 Hz
    Hysteresis5 ... 15 typ. 10 %
    Reverse polarity protectionreverse polarity-conductive
    Short-circuit protectionpulsing
    Voltage drop≤ 3 V
    Operating current2 ... 100 mA
    Off-state current< 500 µA
    Switching state indicatorLED, red
    Mag. Field strength, AC fields250 mT
    Mag. Field strength, DC fields250 mT
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typeCable connector M12 x 1 , TPE cable
    L = 500 mm
    L1 = 50 mm
    L2 = 300 mm
    Housing materialXylan coated - Stainless steel 1.4305 / AISI 303
    Sensing faceXylan coated - Stainless steel 1.4305 / AISI 303
    Degree of protectionIP67
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550