Inductive sensor NBB2-12GM50-E2-T-V1

Part number: NBB2-12GM50-E2-T-V1

  • 2 mm flush
  • Extended operating voltage range
  • Extended temperature range
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typePNP
    Rated operating distance2 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 1.62 mm
    Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
    12 mm x 12 mm x 1 mm
    Reduction factor rAl 0.35
    Reduction factor rCu 0.2
    Reduction factor r304 0.7
    Reduction factor rBrass 0.4
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 65 V
    Switching frequency0 ... 1200 Hz
    Hysteresis0.02 ... 0.44
    Reverse polarity protectionyes
    Short-circuit protectionyes
    Overload resistanceyes
    Wire breakage protectionyes
    Inductive overvoltage protectionyes
    Surge suppressionyes
    Ripple10 %
    Voltage drop≤ 2.5 V
    Repeat accuracy0.1 mm
    Operating current0 ... 300 mA
    Off-state current0.01 mA
    No-load supply current≤ 10 mA
    Time delay before availability≤ 40 ms
    Switching state indicatorMultihole-LED, yellow
    Functional safety related parameters
    MTTFd1510 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Ambient conditions
    Ambient temperature-25 ... 100 °C (-13 ... 212 °F)
    Storage temperature-40 ... 100 °C (-40 ... 212 °F)
    Mechanical specifications
    Connection type4-pin, M12 x 1 connector
    Housing materialbrass, nickel-plated
    Sensing facePBT
    Degree of protectionIP67
    Mass20 g
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550