Inductive sensor NMB15-30GM65-Z4-V1

Part number: NMB15-30GM65-Z4-V1

  • 15 mm flush
  • Stainless steel sensing face
  • Increased operating distance
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typeTwo-wire
    Rated operating distance15 mm
    Installationflush (Requirements: see drawing below)
    Output polarityDC
    Assured operating distance0 ... 12.15 mm
    Actuating elementFerrous and nonferrous targets
    Reduction factor rAl 0.4
    Reduction factor rCu 0.2
    Reduction factor r304 0.85
    Reduction factor rSt37 1
    Output type2-wire
    Nominal ratings
    Operating voltage6 ... 30 V
    Switching frequency150 Hz
    Hysteresis5 ... 15 typ. 10 %
    Reverse polarity protectionreverse polarity-conductive
    Short-circuit protectionyes
    Voltage drop< 3 V DC
    Operating current2 ... 100 mA
    Off-state current< 400 µA
    Functional safety related parameters
    MTTFd970 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Indicators/operating means
    Operation indicator4-way LED
    Yellow: output
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature0 ... 70 °C (32 ... 158 °F)
    Mechanical specifications
    Connection typeM12 connector, 4-pin
    Housing materialStainless steel 1.4305 / AISI 303
    Sensing faceStainless steel 1.4305 / AISI 303
    Degree of protectionIP67
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550