Pepperl+FuchsProximity SensorsInductive Sensors
Inductive sensor NCN50-FP-Z2-P1-Y804772

Part number: NCN50-FP-Z2-P1-Y804772

  • Comfort series
  • 50 mm non-flush
    • Datasheet NCN50-FP-Z2-P1-Y804772

    Specification

    General specifications
    Rated operating distance50 mm
    Installationnon-flush
    Output polarityDC
    Assured operating distance0 ... 40.5 mm
    Actual operating distance45 ... 55 mm typ.
    Reduction factor rAl 0.4
    Reduction factor rCu 0.35
    Reduction factor r304 0.8
    Output type2-wire
    Nominal ratings
    Operating voltage10 ... 60 V
    Switching frequency0 ... 80 Hz
    Hysteresis0 ... 20 typ. 5 %
    Reverse polarity protectionreverse polarity tolerant
    Short-circuit protectionpulsing
    Voltage drop≤ 6 V
    Operating current2 ... 200 mA up to 70 °C (158 °F)
    2 ... 100 mA above 70 °C (158 °F)
    Off-state current0.4 ... 1 mA typ. 0.6 mA
    Time delay before availability≤ 300 ms
    Switching state indicatorLED, yellow
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCertified by China Compulsory Certification (CCC)
    Ambient conditions
    Ambient temperature-40 ... 70 °C (-40 ... 158 °F)
    Storage temperature-40 ... 85 °C (-40 ... 185 °F)
    Mechanical specifications
    Connection typescrew terminals
    Core cross sectionup to 2.5 mm2
    Housing materialPBT
    Sensing facePBT
    Degree of protectionIP67
    Tightening torque, housing screws1 Nm
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550