Inductive sensor NBN3-F31-E8-V18

Part number: NBN3-F31-E8-V18

  • Direct mounting on standard actuators
  • Fixed setting
  • Specification

    General specifications
    Switching function2 x normally open (NO)
    Output typePNP
    Rated operating distance3 mm
    Installationflush mountable
    Output polarityDC
    Assured operating distance0 ... 2.43 mm
    Actual operating distance2.7 ... 3.3 mm typ.
    Reduction factor rAl 0.5
    Reduction factor rCu 0.4
    Reduction factor r304 1
    Reduction factor rSt37 1.2
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V DC
    Switching frequency0 ... 500 Hz
    Hysteresistyp. 5 %
    Reverse polarity protectionall connections
    Short-circuit protectionpulsing
    Voltage drop≤ 3 V
    Operating current0 ... 100 mA
    Off-state current0 ... 0.1 mA typ. 20 µA at 25 °C
    No-load supply current≤ 25 mA
    Operating voltage indicatorLED, green
    Switching state indicatorLED, yellow
    Functional safety related parameters
    MTTFd780 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typeConnector plug M18 x 1 , 4-pin
    Housing materialPBT
    Sensing facePBT
    Degree of protectionIP67
    Tightening torque, fastening screws4 Nm ... 5 Nm
    ECLASS 13.027220501
    ECLASS 12.027220501
    ECLASS 11.027220501
    ECLASS 10.0.127220501
    ECLASS 9.027220501
    ECLASS 8.027220501
    ECLASS 5.127220501
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550