Inductive sensor NBB8-18GM60-B3-V1

Part number: NBB8-18GM60-B3-V1

  • Basic series
  • 8 mm flush
  • Cylindrical
  • NO/NC selectable
  • On/Off delay (disconnectable)
  • Specification

    General specifications
    Switching functionNormally open/closed (NO/NC) programmable
    Output typeAS-Interface
    Rated operating distance8 mm
    Installationflush
    Assured operating distance0 ... 6.48 mm
    Reduction factor rAl 0.4
    Reduction factor rCu 0.4
    Reduction factor r304 0.7
    Reduction factor rBrass 0.5
    Node typeStandard node
    AS-Interface specificationV2.1
    Required gateway specification≥ V2.0
    Output type2-wire
    Nominal ratings
    Operating voltage26.5 ... 31.9 V via AS-i bus system
    Switching frequency0 ... 200 Hz
    Hysteresis1 ... 15 typ. 5 %
    Reverse polarity protectionreverse polarity protected
    No-load supply current≤ 25 mA
    Switching state indicatordual-LED, yellow
    Error indicatordual-LED, red
    Functional safety related parameters
    MTTFd926 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    EN 50295:1999
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Storage temperature-40 ... 85 °C (-40 ... 185 °F)
    Mechanical specifications
    Connection type4-pin, M12 x 1 connector
    Housing materialbrass, nickel-plated
    Sensing facePBT
    Degree of protectionIP67
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550