Pepperl+FuchsProximity SensorsInductive Sensors
Inductive sensor NBB8-18GM60-B3B-V1
AS-Interface

Part number: NBB8-18GM60-B3B-V1

  • 8 mm flush
  • Cylindrical
  • A/B node with extended addressing possibility for up to 62 nodes
  • NO/NC selectable
  • On/Off delay (disconnectable)
    • Datasheet NBB8-18GM60-B3B-V1

    Specification

    General specifications
    Switching functionNormally open/closed (NO/NC) programmable
    Output typeAS-Interface
    Rated operating distance8 mm
    Installationflush
    Assured operating distance0 ... 6.48 mm
    Reduction factor rAl 0.4
    Reduction factor rCu 0.4
    Reduction factor r304 0.7
    Reduction factor rBrass 0.5
    Node typeA/B node
    AS-Interface specificationV3.0
    Required gateway specification≥ V2.1
    Output type2-wire
    Nominal ratings
    Operating voltage26.5 ... 31.9 V via AS-i bus system
    Switching frequency0 ... 200 Hz
    Hysteresis1 ... 15 typ. 5 %
    Reverse polarity protectionreverse polarity protected
    No-load supply current≤ 25 mA
    Switching state indicatordual-LED, yellow
    Error indicatordual-LED, red
    Functional safety related parameters
    MTTFd926 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    EN 50295:1999
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Storage temperature-40 ... 85 °C (-40 ... 185 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Housing materialbrass, nickel-plated
    Sensing facePBT
    Degree of protectionIP67