Pepperl+FuchsProximity SensorsInductive Sensors
Inductive sensor NCN3-F31-B3-V1-K
Valve positioner and valve control module

Part number: NCN3-F31-B3-V1-K

  • Direct mounting on standard actuators
  • Mode of operation, programmable
  • Lead breakage and short-circuit monitoring of the valve
  • Degree of protection IP67
  • Communication monitoring, turn-off
    • Datasheet NCN3-F31-B3-V1-K

    Specification

    General specifications
    Switching functionNormally open/closed (NO/NC) programmable
    Output typeAS-Interface
    Rated operating distance3 mm
    Installationflush mountable
    Assured operating distance0 ... 2.43 mm
    Reduction factor rAl 0.5
    Reduction factor rCu 0.45
    Reduction factor r304 1
    Reduction factor rSt37 1.2
    Node typeStandard node
    AS-Interface specificationV2.1
    Required gateway specification≥ V2.1
    Nominal ratings
    Operating voltage26.5 ... 31.9 V via AS-i bus system
    Switching frequency0 ... 100 Hz
    No-load supply current≤ 35 mA
    Functional safety related parameters
    MTTFd842 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Indicators/operating means
    LED PWRAS-Interface voltage; LED green
    LED INswitching state (input); LED yellow
    LED OUTbinary LED yellow/red
    yellow: switching state
    red: lead breakage/short-circuit
    Electrical specifications
    Rated operating voltage26.5 ... 31.6 V from AS-Interface
    Rated operating current100 mA
    Compliance with standards and directives
    Standard conformity
    Electromagnetic compatibilityEN 50295:1999-10
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection (system side)4-pin, M12 x 1 connector
    Connection (valve side)0.5 m, PVC cable
    Core cross section (valve side)0.75 mm2
    Connector housingmetal
    Housing materialPBT
    Degree of protectionIP67
    Cable
    Cable diameter6 mm ± 0.2 mm
    Bending radius> 10 x cable diameter
    Tightening torque, fastening screws4 Nm ... 5 Nm
    Notevalve voltage limited to 26,4 V max.; valve power 2,5 W max.