Inductive sensor NMB3-8GM35-E2-150MM-V3

Part number: NMB3-8GM35-E2-150MM-V3

  • 3 mm flush
  • Stainless steel sensing face
  • Increased operating distance
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typePNP
    Rated operating distance3 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 2.43 mm
    Reduction factor rAl 0.3
    Reduction factor rCu 0.2
    Reduction factor r304 0.7
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V
    Switching frequency0 ... 360 Hz
    Hysteresis5 ... 15 typ. 10 %
    Reverse polarity protectionyes
    Short-circuit protectionyes
    Voltage drop≤ 2 V
    Operating current0 ... 100 mA
    Off-state current0 ... 10 µA typ. 0.1 µA at 25 °C
    No-load supply current≤ 10 mA
    Functional safety related parameters
    MTTFd2000 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Indicators/operating means
    Operation indicatorDual LED
    Green: power
    Yellow: output
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 75 °C (-13 ... 167 °F)
    Mechanical specifications
    Connection typeCable connector M8 x 1 , PUR 150 mm
    Housing materialStainless steel 1.4305 / AISI 303
    Sensing faceStainless steel 1.4305 / AISI 303
    Degree of protectionIP67
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550