Pepperl+FuchsProximity SensorsInductive Sensors
Inductive sensor NBN4-12GM50-E2-C-V1

Part number: NBN4-12GM50-E2-C-V1

  • 4 mm non-flush
  • Weld Immune
    • Datasheet NBN4-12GM50-E2-C-V1

    Specification

    General specifications
    Switching functionNormally open (NO)
    Output typePNP
    Rated operating distance4 mm
    Installationnon-flush
    Output polarityDC
    Assured operating distance0 ... 3.24 mm
    Reduction factor rAl 0.4
    Reduction factor rCu 0.3
    Reduction factor r304 0.7
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V DC
    Switching frequency0 ... 1200 Hz
    Hysteresistyp. 5 %
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 3 V
    Operating current0 ... 200 mA
    Off-state current0 ... 0.5 mA typ. 0.1 µA at 25 °C
    No-load supply current≤ 17 mA
    Constant magnetic field200 mT
    Alternating magnetic field200 mT
    Operating voltage indicatorLED, green
    Switching state indicatorLED, yellow
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Core cross section-
    Housing materialBrass, PTFE coated
    Sensing facePPS
    Degree of protectionIP67
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550