Inductive sensor NEB8-12GM50-E2-V1

Part number: NEB8-12GM50-E2-V1

  • Increased operating distance
  • 8 mm quasi flush
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typePNP
    Rated operating distance8 mm
    Installationquasi flush
    Output polarityDC
    Assured operating distance0 ... 6.48 mm
    Reduction factor rAl 0.3
    Reduction factor rCu 0.25
    Reduction factor r304 0.7
    Reduction factor rSt37 1
    Output type3-wire
    Nominal ratings
    Installation conditions
    A2 mm
    B14 mm
    C24 mm
    F46 mm
    Operating voltage10 ... 30 V
    Switching frequency0 ... 400 Hz
    Hysteresis≤ 10 %
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionyes
    Voltage drop≤ 2 V
    Operating current0 ... 200 mA
    Off-state current0 ... 0.1 mA typ. 0.1 µA at 25 °C
    No-load supply current≤ 10 mA
    Switching state indicatorLED, yellow
    Functional safety related parameters
    MTTFd602 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Housing materialchromium plated brass
    Sensing facePBT
    Degree of protectionIP67
    Protection classII
    Mass34 g
    Tightening torque0 ... 10 Nm (6 Nm for the first 10 mm thread length)
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550