Inductive sensor NMB5-12GM65-E3-V1

Part number: NMB5-12GM65-E3-V1

  • 5 mm flush
  • Stainless steel sensing face
  • Increased operating distance
  • Specification

    General specifications
    Switching functionNormally closed (NC)
    Output typePNP
    Rated operating distance5 mm
    Installationflush (Requirements: see drawing below)
    Output polarityDC
    Assured operating distance0 ... 4.05 mm
    Actuating elementFerrous and nonferrous targets
    Reduction factor rAl 0.3
    Reduction factor rCu 0.2
    Reduction factor r304 0.85
    Reduction factor rSt37 1
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V DC
    Switching frequency0 ... 360 Hz
    Hysteresis3 ... 15 typ. 5 %
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 2 V DC
    Operating current≤ 200 mA
    Off-state current≤ 10 µA
    No-load supply current≤ 15 mA
    Operating voltage indicatorLED, green
    Switching state indicatorLED, yellow
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Housing materialStainless steel 1.4305 / AISI 303
    Sensing faceStainless steel 1.4305 / AISI 303
    Degree of protectionIP67 / IP68 / IP69K - cordset dependent according to cable specification
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550