Inductive sensor NBN8-F1-E3-V3

Part number: NBN8-F1-E3-V3

  • 8 mm non-flush
  • 3-wire DC
  • Specification

    General specifications
    Switching functionNormally closed (NC)
    Output typePNP
    Rated operating distance8 mm
    Installationnon-flush
    Output polarityDC
    Assured operating distance0 ... 6.48 mm
    Reduction factor rAl 0.45
    Reduction factor rCu 0.45
    Reduction factor r304 0.7
    Reduction factor rBrass 0.55
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V DC
    Switching frequency0 ... 1400 Hz
    Hysteresistyp. 5%
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 2.5 V
    Operating current0 ... 250 mA
    Off-state current0 ... 0.01 mA typ. 0.1 µA at 25 °C
    No-load supply current≤ 15 mA
    Switching state indicatorLED, yellow
    Functional safety related parameters
    MTTFd1640 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Approvals and certificates
    Protection classII
    Rated insulation voltage60 V
    Rated impulse withstand voltage800 V
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typeConnector plug M8 x 1 , 3-pin
    Housing materialPA
    Sensing facePA
    Degree of protectionIP67
    Tightening torque, fastening screwsThreading M3 max: 1.1 Nm
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550