Inductive sensor NBN4-F29-A2

Part number: NBN4-F29-A2

  • 4 mm non-flush
  • 4-wire DC
  • Specification

    General specifications
    Switching functioncomplementary
    Output typePNP
    Rated operating distance4 mm
    Installationnon-flush
    Output polarityDC
    Assured operating distance0 ... 3.24 mm
    Reduction factor rAl 0.4
    Reduction factor rCu 0.3
    Reduction factor r304 0.7
    Output type4-wire
    Nominal ratings
    Operating voltage4.75 ... 30 V DC
    Switching frequency0 ... 1000 Hz
    Hysteresistyp. 5 %
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 2 V
    Operating current0 ... 100 mA
    Off-state current0 ... 0.5 mA typ. 0.1 µA at 25 °C
    No-load supply current≤ 15 mA
    Time delay before availability≤ 5 ms
    Switching state indicatorLED, yellow
    Functional safety related parameters
    MTTFd1680 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Storage temperature-40 ... 85 °C (-40 ... 185 °F)
    Mechanical specifications
    Connection typecable PVC , 2 m
    Core cross section0.14 mm2
    Housing materialPPS
    Sensing facePPS
    Degree of protectionIP67
    Cable
    Cable diameter3 mm + 0.3 mm
    Bending radius> 10 x cable diameter
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550