Inductive sensor NJ1,5-F2-E2

Part number: NJ1,5-F2-E2

  • 1.5 mm with switching tappet
  • 3-wire DC
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typePNP
    Rated operating distance1.5 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 1.215 mm
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V DC
    Switching frequency0 ... 1000 Hz
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 3 V
    Operating current0 ... 200 mA
    No-load supply current≤ 15 mA
    Switching state indicatorLED, red
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typecable PUR , 2 m
    Core cross section0.34 mm2
    Housing materialPA
    Degree of protectionIP67
    NoteUse a stop screw combined with a model -F2 sensor from Pepperl+Fuchs GmbH.
    The maximum actuation speed of the control slide is 0.1 m/s
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550