Inductive sensor NEN40-30GM60-E2-V1

Part number: NEN40-30GM60-E2-V1

  • 40 mm non-flush
  • Increased operating distance
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typePNP
    Rated operating distance40 mm
    Installationnon-flush
    Output polarityDC
    Assured operating distance0 ... 32.4 mm
    Reduction factor rAl 0.36
    Reduction factor rCu 0.32
    Reduction factor r304 0.69
    Output type3-wire
    Nominal ratings
    Installation conditions
    Ain aluminum: 25 mm
    in steel 1.0037 (St37): 35 mm
    in brass 25 mm
    in stainless steel 20 mm
    B40 mm
    C120 mm
    F150 mm
    Operating voltage10 ... 30 V
    Switching frequency0 ... 100 Hz
    Hysteresistyp. 5%
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 2 V
    Operating current0 ... 200 mA
    Off-state current0 ... 0.1 mA typ. 0.1 µA at 25 °C
    No-load supply current≤ 10 mA
    Switching state indicatorLED, yellow
    Functional safety related parameters
    MTTFd211 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Housing materialchromium plated brass
    Sensing facePBT
    Degree of protectionIP67
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550