Pepperl+FuchsProximity SensorsInductive Sensors
Inductive sensor NCB1,5-18GM60-E2-D-V1
Inductive sensor

Part number: NCB1,5-18GM60-E2-D-V1

  • 1.5 mm flush
  • Compression proof up to 350 bar, dynamic on active surface
  • For applications in hydraulic cylinder
    • Datasheet NCB1,5-18GM60-E2-D-V1

    Specification

    General specifications
    Switching functionNormally open (NO)
    Output typePNP
    Rated operating distance1.5 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 1.22 mm
    Reduction factor rAl 0.3
    Reduction factor rCu 0.2
    Reduction factor r304 0.5
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 60 V DC
    Switching frequency0 ... 1500 Hz
    Hysteresistyp. 5 %
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 3 V
    Operating current0 ... 200 mA
    No-load supply current≤ 10 mA
    Limit data
    Operating pressure350 bar (5076.4 psi)
    Functional safety related parameters
    MTTFd1240 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    IEC 60947-5-2:2007
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCertified by China Compulsory Certification (CCC)
    Ambient conditions
    Ambient temperature-35 ... 80 °C (-31 ... 176 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Housing materialStainless steel 1.4305 / AISI 303
    Sensing faceEpoxy (black)
    Degree of protectionIP67