Inductive sensor NJ1.5-PD-E02-1.250-V95
Proximity switch
Part number: NJ1.5-PD-E02-1.250-V95
Specification
| General specifications | ||
|---|---|---|
| Switching function | Normally open (NO) | |
| Output type | PNP/NPN | |
| Rated operating distance | 1.5 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 1.21 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor r304 | 0.85 | |
| Output type | 4-wire | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V DC | |
| Switching frequency | 30 Hz | |
| Hysteresis | 10 ... 20 typ. 15 % | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Voltage drop | ≤ 2 V DC | |
| Operating current | ≤ 200 mA | |
| Off-state current | ≤ 100 µA | |
| No-load supply current | ≤ 35 mA | |
| Mag. Field strength, AC fields | 250 mT | |
| Mag. Field strength, DC fields | 100 mT | |
| Limit data | ||
| Operating pressure dynamically | 3000 psi | |
| Indicators/operating means | ||
| LED green | Power on | |
| LED yellow | Output status | |
| Standard conformity | ||
| Standards | EN 60947-5-2 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug 7/8 inch-16 UN , 5-pin | |
| Degree of protection | IP67 | |
| Material | Housing: zinc Probe: aluminum | |
| Note | X = 1.250 in (31.8 mm) | |