Inductive sensor NMB8-30GM65-Z0-FE-V1

Part number: NMB8-30GM65-Z0-FE-V1

  • Stainless steel sensing face
  • Sensing range 8 mm
  • 2-wire DC
  • Ferrous targets
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typeTwo-wire
    Rated operating distance8 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 6.48 mm
    Actuating elementFerrous targets
    Reduction factor rAl 0
    Reduction factor rCu 0
    Reduction factor r304 0.75
    Reduction factor rSt37 1
    Reduction factor rBrass 0
    Output type2-wire
    Nominal ratings
    Operating voltage6 ... 30 V DC
    Switching frequency10 Hz
    Hysteresis3 ... 15 typ. 5 %
    Reverse polarity protectionreverse polarity tolerant
    Short-circuit protectionno
    Voltage drop≤ 5.5 V DC
    Operating current2 ... 100 mA
    Off-state current≤ 1 mA
    Indicators/operating means
    Operation indicator4-way LED
    Yellow: output
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, General Purpose
    CSA approvalcCSAus Listed, General Purpose
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-40 ... 70 °C (-40 ... 158 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Housing materialStainless steel 1.4305 / AISI 303
    Sensing faceStainless steel 1.4305 / AISI 303
    Degree of protectionIP67 / IP68 / IP69K - cordset dependent according to cable specification
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550