Inductive sensor NBB10-30GM60-AAR-900MM-4PKD
Inductive sensor
Part number: NBB10-30GM60-AAR-900MM-4PKD
Specification
| General specifications | ||
|---|---|---|
| Switching function | change-over contact | |
| Output type | relay | |
| Rated operating distance | 10 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Output type | Relay output | |
| Mechanical life | No load: 2 x 107 operations Full load: 1 x 105 switching cycles | |
| Nominal ratings | ||
| Operating voltage | 10 ... 30 V DC | |
| Switching frequency | 20 Hz | |
| Hysteresis | approx. 10 % | |
| Reverse polarity protection | yes | |
| Short-circuit protection | no | |
| Operating current | ≤ 50 mA | |
| Switching state indicator | LED, yellow | |
| Output | ||
| Switching voltage | max 28 V DC | |
| Switching current | max 6 A DC resistive load | |
| Switching power | max 180 W | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | fixed cable with plug | |
| Core cross section | 0.75 mm2 | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Degree of protection | IP67 (Sensor side) | |
| Connector | ||
| Connection assembly | Aptiv housing 12010974 Aptiv contact 12089040 Aptiv seal 15324982 | |
| Cable | ||
| Material | TPE | |
| Color | black | |
| Number of cores | 4 | |
| Length | 900 mm | |
| General information | ||
| Scope of delivery | ||