Inductive sensor NBB1-3M22-E0-0,6M-V1

Part number: NBB1-3M22-E0-0,6M-V1

  • 1 mm flush
  • Miniature design
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typeNPN
    Rated operating distance1 mm
    Installationflush
    Output polarityDC
    Assured operating distance0 ... 0.81 mm
    Reduction factor rAl 0.4
    Reduction factor rCu 0.29
    Reduction factor r304 0.76
    Reduction factor rBrass 0.46
    Output type3-wire
    Nominal ratings
    Operating voltage10 ... 30 V
    Switching frequency0 ... 700 Hz
    Hysteresistyp. 5%
    Reverse polarity protectionreverse polarity protected
    Short-circuit protectionpulsing
    Voltage drop≤ 3 V
    Operating current0 ... 100 mA
    Off-state current0 ... 0.1 mA typ. at 25 °C
    No-load supply current≤ 10 mA
    Switching state indicatorLED, yellow
    Compliance with standards and directives
    Standard conformity
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    UL approvalcULus Listed, Class 2 Power Source
    CCC approvalCCC approval / marking not required for products rated ≤36 V
    Ambient conditions
    Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
    Mechanical specifications
    Connection typefixed cable with plug
    Housing materialStainless steel 1.4305 / AISI 303
    Sensing facePC
    Degree of protectionIP67
    Connector
    ThreadingM12 x 1
    Number of pins4
    Cable
    Cable diameter2.6 mm ± 0.1 mm
    Bending radius> 10 x cable diameter
    MaterialPUR
    Number of cores3
    Core cross section0.055 mm2
    Length0.6 m
    ECLASS 13.027274001
    ECLASS 12.027274001
    ECLASS 11.027270101
    ECLASS 10.0.127270101
    ECLASS 9.027270101
    ECLASS 8.027270101
    ECLASS 5.127270101
    ETIM 9.0EC002714
    ETIM 8.0EC002714
    ETIM 7.0EC002714
    ETIM 6.0EC002714
    ETIM 5.0EC002714
    UNSPSC 12.139121550