Capacitive sensor CCB10-30GS55-N1-V1

Part number: CCB10-30GS55-N1-V1

  • 10 mm flush
  • The switching distance can be set over a wide range with the potentiometer
  • Specification

    General specifications
    Switching functionNormally open (NO)
    Output typeNAMUR
    Rated operating distance10 mm
    Installationflush
    Output type2-wire
    Nominal ratings
    Installation conditions
    A0 mm
    B0 mm
    C20 mm
    F60 mm
    Nominal voltage8.2 V (Ri approx. 1 kΩ)
    Operating voltage5 ... 15 V
    Switching frequency0 ... 50 Hz
    Reverse polarity protectionreverse polarity protected
    Current consumption
    Measuring plate not detected≤ 1.5 mA
    Measuring plate detected≥ 2.5 mA
    Switching state indicatorLED, yellow
    Functional safety related parameters
    MTTFd1134 a
    Mission Time (TM)20 a
    Diagnostic Coverage (DC)0 %
    Compliance with standards and directives
    Standard conformity
    NAMUREN 60947-5-6:2000
    IEC 60947-5-6:1999
    StandardsEN 60947-5-2:2007
    EN 60947-5-2/A1:2012
    IEC 60947-5-2:2007
    IEC 60947-5-2 AMD 1:2012
    Approvals and certificates
    ATEX approval
    Equipment protection level GaBVS 13 ATEX E 074 X
    Equipment protection level DaBVS 13 ATEX E 074 X
    ETL approvalcETLus
    Ambient conditions
    Ambient temperature-20 ... 70 °C (-4 ... 158 °F)
    Mechanical specifications
    Connection typeConnector plug M12 x 1 , 4-pin
    Housing materialStainless steel 1.4305 / AISI 303
    Sensing facePTFE
    Degree of protectionIP67
    General information
    Use in the hazardous areasee instruction manuals
    ECLASS 13.027274201
    ECLASS 12.027274201
    ECLASS 11.027270102
    ECLASS 10.0.127270102
    ECLASS 9.027270102
    ECLASS 8.027270102
    ECLASS 5.127270102
    ETIM 9.0EC002715
    ETIM 8.0EC002715
    ETIM 7.0EC002715
    ETIM 6.0EC002715
    ETIM 5.0EC002715
    UNSPSC 12.139121550